 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AG101 Product Features * * * * * * * 60 - 3000 MHz 14 dB Gain 2.4 dB Noise Figure +32 dBm OIP3 Single +3.3 or +4.5 Supply Internally matched to 50 Lead-free/Green/RoHScompliant SOT-89 Package * MTTF > 10,000 years GaAs MMIC Gain Block Product Description The AG101 is a general-purpose gain block that offers good dynamic range and low noise figure in a low-cost surface-mount package. The combination of near-constant OIP3 and low noise figure performance over frequency makes it attractive for both narrowband and broadband applications. The device combines dependable performance with superb quality to maintain MTTF values exceeding 10,000 years at mounting temperatures of +85 C and is available in the environmentally-friendly lead-free/green /RoHS-compliant SOT-89 package. The AG101 uses a high reliability GaAs MMIC technology and only requires DC-blocking and bypass capacitors, and an inductive RF choke for operation. Internal matching provides a 50 ohm input / output impedance minimizing the number of required external components. The broadband MMIC amplifier is well suited for various current and next generation wireless technologies such as GPRS, GSM, CDMA, and W-CDMA. In addition, the AG101 will work for other applications within the 60 to 3000 MHz frequency range such as fixed wireless. Functional Diagram GND 4 1 RF IN 2 GND 3 RF OUT Applications * * * * * * Mobile Infrastructure CATV / DBS W-LAN / ISM RFID Defense / Homeland Security Fixed Wireless Function Input Output/Bias Ground Pin No. 1 3 2, 4 Specifications (1) Parameter Operational Bandwidth Test Frequency Gain Input Return Loss (5) Output Return Loss Output P1dB Output IP3 (2) Noise Figure (3) Operating Current Range Supply Voltage Typical Performance (4) Units MHz MHz dB dB dB dBm dBm dB mA V Min 60 13 Typ 800 14 8.5 20 +15 +32 2.4 50 4.5 Max 3000 16 Parameter Frequency S21 S11 (5) S22 Output P1dB Output IP3 Noise Figure Supply Voltage Device Current Units MHz dB dB dB dBm dBm dB V mA Typical 900 1900 14 12.8 -10 -9 -27 -22 +15 +15 +32.5 +33.1 2.4 2.6 +4.5 50 900 14 -10 -28 +14 +32 2.2 1900 12.5 -9 -19 +14 +32.5 2.4 +3.3 48 +28 40 75 1. Test conditions unless otherwise noted: T = 25 C, 50 system. 2. 3OIP measured with two tones at an output power of +2.5 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 3. Noise figure can be optimized by matching the input for optimal return loss. 4. A supply voltage between 3 to 4.5V can be used for the devices. 4. Parameters reflect performance in an AG101-PCB application circuit, as shown on page 4. 5. Input return loss can be dramatically improved (<-20 dB) for narrowband applications as shown on page 5 of this datasheet. Absolute Maximum Rating Parameter Storage Temperature DC Voltage RF Input Power (continuous) Junction Temperature Thermal Resistance -55 to +150 C +5.5 V +4 dBm +160 C 88 C / W Rating Ordering Information Part No. AG101-G AG101-PCB Description GaAs MMIC Gain Block (lead-free/green/RoHS-compliant SOT-89 Pkg) 0.8 - 2.6 GHz Fully Assembled Application Circuit Operation of this device above any of these parameters may cause permanent damage. Standard T/R size = 3000 pieces on a 13" reel. Specifications and information are subject to change without notice. Page 1 of 6 May 2008 WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com AG101 GaAs MMIC Gain Block S-Parameters (VDS = +4.5 V, IDS = 50 mA, T = 25 C, 50 ohm system) Input return loss can be improved with the appropriate input matching network shown later in this datasheet. Gain vs. Frequency Typical Device Data S11 vs. Frequency S22 vs. Frequency 16 14 Gain (dB) 12 10 8 -40c +25c +85c 0 -5 -10 -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 -40c +25c +85c 0 -40c +25c +85c -5 -10 -15 -20 -25 -30 3000 0 500 1000 1500 2000 2500 3000 Frequency (MHz) IP3 Vs Pout per Tone Frequency = 1900 / 1910 MHz 6 Frequency (MHz) OIP3 vs. Frequency 34 0 500 1000 1500 2000 2500 Frequency (MHz) Output IP3 vs. Output Power frequency = 900 / 910 MHz 40 40 35 30 25 32 OIP3 (dBm) 35 30 28 26 Pout = 2dB/tone 24 0 500 1000 1500 2000 2500 3000 Frequency (MHz) 20 0 2 4 6 8 10 30 25 -40c +25c +85c 20 0 2 4 -40 6 25 8 80 10 Output Power per tone (dBm) Output Power per tone (dBm) Noise Figure vs. Frequency 6 5 NF (dB) 4 3 2 1 0 0 500 1000 1500 2000 2500 3000 Frequency (MHz) S-Parameters (VD = +4.5 V, ID = 50 mA, T = 25 C, calibrated to device leads) Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 50 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 -4.72 -8.67 -8.96 -9.06 -9.04 -9.00 -8.89 -8.74 -8.65 -8.40 -7.99 -7.93 -7.47 -30.88 -27.48 -37.68 -51.15 -66.87 -82.11 -97.31 -112.48 -128.51 -142.86 -157.26 -171.48 175.92 15.44 13.93 13.75 13.60 13.47 13.39 13.13 12.91 12.68 12.48 12.22 11.88 11.53 164.91 165.39 157.18 148.11 137.91 128.62 118.57 109.09 99.48 89.94 80.41 71.42 62.05 -21.66 -20.26 -20.14 -20.02 -19.92 -19.85 -19.73 -19.56 -19.71 -19.53 -19.40 -19.33 -19.58 30.26 3.92 -2.25 -7.65 -10.63 -15.19 -18.74 -23.00 -28.33 -33.37 -37.91 -42.30 -47.37 -9.38 -16.70 -17.56 -18.25 -19.05 -20.28 -21.30 -22.57 -25.15 -27.03 -28.58 -28.56 -28.48 -40.39 -32.88 -31.25 -35.67 -43.62 -51.49 -61.37 -73.75 -85.19 -103.19 -135.19 -177.83 153.84 Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com Page 2 of 6 May 2008 AG101 Gain vs. Frequency GaAs MMIC Gain Block S-Parameters (VDS = +3.3 V, IDS = 50 mA, T = 25 C, 50 ohm system) Input return loss can be improved with the appropriate input matching network shown later in this datasheet. S11 vs. Frequency S22 vs. Frequency Typical Device Data 16 14 Gain (dB) S11 (dB) 12 10 8 -40c +25c +85c 0 -5 0 -40c +25c +85c -10 -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Noise Figure vs. Frequency -40c +25c +85c S22 (dB) -10 -20 -30 -40 0 500 1000 1500 2000 2500 3000 6 Frequency (MHz) OIP3 vs Output Power per tone 34 32 30 Frequency (MHz) OIP3 vs Output Power per tone -40 C 25 C 80 C 34 32 30 28 26 -40 25 80 6 5 NF (dB) 4 3 2 1 0 0 500 1000 1500 2000 2500 3000 Frequency (MHz) 28 26 800 MHz 24 24 10 1900 MHz 0 2 4 6 8 Output Power per Tone (dBm) 10 0 2 4 6 8 Output Power per Tone (dBm) Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com Page 3 of 6 May 2008 AG101 GaAs MMIC Gain Block Application Circuit: 800 - 2600 MHz (AG101-PCB) +4.5 V ID=C6 C=1.8e4 pF 14 DB(|S[1,1]|) * (R) DB(|S[2,1]|) * (L) DB(|S[2,2]|) * (R) 0 13 Z0=50 Ohm L=170 mil Eeff=3.52 Loss=0 F0=1 GHz ID=L3 L=12 nH ID=C5 C=56 pF -5 ID=C2 C=56 pF NET="AG101" S21 (dB) 12 -10 11 -15 10 ID=L2 L=10 nH -20 9 0.6 0.8 1 1.2 1.4 1.6 1.8 Frequency (GHz) 2 2.2 2.4 2.6 -25 Circuit Board Material: .014" FR-4, 4 layers, .062" total thickness Reference Design: 70 MHz +4.5 V C=1e4 pF 17 0 16 L=180 nH C=1e4 pF L=180 nH NET="AG101" C=1e4 pF -5 S21 (dB) 15 -10 14 -15 13 C=5.6 pF -20 DB(|S[1,1]|) (R) DB(|S[2,1]|) (L) DB(|S[2,2]|) (R) 12 0.04 0.05 0.06 0.07 0.08 Frequency (GHz) 0.09 0.1 0.11 -25 Reference Design: 170 MHz +4.5 V C=1e4 pF 17 DB(|S[1,1]|) (R) DB(|S[2,1]|) (L) DB(|S[2,2]|) (R) 0 16 L=220 nH C=1000 pF L=39 nH NET="AG101" C=1000 pF -5 S21 (dB) 15 -10 14 -15 13 C=3.9 pF -20 12 0.1 0.13 0.16 0.19 Frequency (GHz) 0.22 0.25 -25 Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com Page 4 of 6 May 2008 S11, S22 (dB) S11, S22 (dB) S11, S22 (dB) AG101 GaAs MMIC Gain Block Reference Design: 450 MHz +4.5 V C=1e4 pF 16 DB(|S[1,1]|) (R) DB(|S[2,1]|) (L) DB(|S[2,2]|) (R) 0 15 -5 C=1000 pF L=15 nH NET="AG101" C=1000 pF S21 (dB) L=82 nH 14 -10 13 -15 12 C=1.2 pF -20 11 0.3 0.35 0.4 0.45 0.5 0.55 Frequency (GHz) 0.6 0.65 0.7 -25 Reference Design: 800 MHz 15 +4.5 V 0 14 C=1e4 pF -5 S11, S22 (dB) S11, S22 (dB) S11, S22 (dB) DB(|S(1,1)|) (R) DB(|S(2,1)|) (L) DB(|S(2,2)|) (R) C=100 pF S21 (dB) 13 -10 12 -15 L=33 nH C=100 pF L=6.8 nH NET="AG101" C=100 pF 11 -20 10 0.6 0.7 0.8 0.9 1 Frequency (GHz) 1.1 1.2 -25 Reference Design: 1900 / 2140 MHz +4.5 V 14 CA P C=1e4 pF CAP C=56 pF TLINP ID=TL1 Z0=50 Ohm L=150 mil Eeff=3.4 Loss=0 F0=2 GHz 0 13 -5 CAP ID=C1 C=3.9 pF SUBCKT NET="AG101" IND ID=L2 L=33 nH S21 (dB) 12 -10 11 -15 IND ID=L1 L=3.3 nH CAP ID=C3 C=56 pF 10 DB(|S(1,1)|) (R) DB(|S(2,1)|) (L) DB(|S(2,2)|) (R) -20 9 1.5 1.6 1.7 1.8 1.9 2 Frequency (GHz) 2.1 2.2 2.3 -25 Reference Design: CATV Single-ended Operation 16 0 +4.5 V C=1.8e4 pF 15 -5 L=100 nH NET="AG101" Z=75 Ohm L=4.7 nH R=5 Ohm C=1000 pF S21 (dB) 14 -10 13 -15 Z=75 Ohm 12 DB(|S[1,1]|) (R) DB(|S[2,1]|) (L) DB(|S[2,2]|) (R) -20 11 0 0.2 0.4 0.6 Frequency (GHz) 0.8 1 -25 Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com Page 5 of 6 May 2008 S11, S22 (dB) AG101 GaAs MMIC Gain Block This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260 C reflow temperature) and leaded (maximum 245 C reflow temperature) soldering processes. The plating material on the leads is NiPdAu. AG101-G (Green / Lead-free SOT-89 Package) Mechanical Information Outline Drawing A1G 1 XXXX-X Product Marking The AG101-G will be marked with an "A1G" designator. An alphanumeric lot code ("XXXX-X") is also marked below the part designator on the top surface of the package. A "1" will be lasermarked in the upper righthand corner. Tape and reel specifications for this part are located on the website in the "Application Notes" section. MSL / ESD Rating Land Pattern ESD Rating: Value: Test: Standard: ESD Rating: Value: Test: Standard: Class 1B Passes 500V to <1000V Human Body Model (HBM) JEDEC Standard JESD22-A114 Class IV Passes 1000V to <2000V Charged Device Model (CDM) JEDEC Standard JESD22-C101 MSL Rating: Level 3 at +260 C convection reflow Standard: JEDEC Standard J-STD-020 Mounting Config. Notes 1. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135") diameter drill and have a final plated thru diameter of .25 mm (.010"). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / thermal via region contacts the heatsink. 4. Do not put solder mask on the backside of the PC board in the region where the board contacts the heatsink. 5. RF trace width depends upon the PC board material and construction. 6. Use 1 oz. Copper minimum. 7. All dimensions are in millimeters (inches). Angles are in degrees. Specifications and information are subject to change without notice. WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com, www.TriQuint.com Page 6 of 6 May 2008 |
Price & Availability of AG101-PCB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |